Specific Measurements
All of the cabinets underneath a washbasin feature an open back in order to allow space for the drains.
50cm cabinets with 3 doors feature one compartment with no back panel; in the h.75cm version, the cabinet is divided into two sections, one with two doors and no back panel, the other with one door, a back panel, and an internal shelf.
In the case of washbasin cabinets with a depth of 63cm, the frames of the drawers and deep drawers are 45cm in depth.
Material Specifications
Structure: 1,8cm-thick particle-wood panels.
Fronts: doors, drawers and basket made from particle-wood panels, 1,8cm thick. The smooth lacquered version is made of MDF with a thickness of cm 1,9.
Technical Specifications and Equipment
Legrabox Drawers/ Deep Drawers: equipped with a metal frame which is characterised by straight rails both internally and externally, 1,28cm thick. Equipped with metal frame on full extension runners and soft closing mechanism.
Doors: equipped with Smoove soft-closing hinges.
Handles: there are several handle models to choose from, as well as a push-pull opening option.
The cod. 152, cod.16 and groove handles are all available in a matt lacquer finish in all the colours displayed in the samples page.
Recess grip handles only available with melamine and matt lacquer finishes. Groove handles only available with wooden (except for 306 Smoky Walnut) and lacquer finishes.
The mod.68 handles protrude by 4cm from the surface of the door.
Legs: cm 3,3 x 3,3 h.10 available in satin finished nickel; thus, the cm h.75 wall mounted vanity becomes a floor standing bathroom vanity cm 85 high (height of the washbasin excluded).
Aluminium Plinth: cm h.10; thus, the cm h.75 wall mounted vanity becomes a floor standing bathroom vanity cm 85 high (height of the washbasin excluded).
Matt-lacquer Plinth: cm h.6; thus, the cm h.75 wall mounted vanity becomes a floor standing bathroom vanity cm 81 high (height of the washbasin excluded).
| Basin Model |
Measurements |
Internal Basin |
Basin
Type |
Mixer Hole |
Overflow
Hole |
| Fagiolo - glossy white ceramic |
cm 60 d.37 h.20 |
cm 54 d.28/31 h.15 |
undermount |
central, on countertop |
yes |
| Ovale - glossy white ceramic |
cm 57,5 d.41 h.21 |
cm 50,5 d.35 h.16 |
undermount |
on countertop, right or left) |
yes |
| Mini - glossy white ceramic |
cm 63 d.42 h.19 |
cm 56/42 d.29 h.14 |
undermount |
central, on countertop |
yes |
| Quadro - glossy white ceramic |
cm 53 d.34 h.17 |
cm 47 d.28,5 h.12,5 |
undermount |
central, on countertop |
yes |
| Civita - matt black ceramic |
cm 58 d.35 h.19 |
cm 55 d.33 h.14 |
countertop |
central, on countertop |
no |
| Faber 50 - Corian deep cloud |
cm 52,4 d.34,3 h.14 |
cm 50 d.32 h.12 |
countertop |
central, on countertop |
no |
| Faber 70 - Corian deep cloud |
cm 72,4 d.34,3 h.14 |
cm 70 d.32 h.12 |
countertop |
central, on countertop |
no |
| Flat - glossy white ceramic |
cm 55 d.37 h.17 |
cm 47,5 d.29,5 h.12 |
countertop |
central, on countertop |
yes |
| Movado 45 - glossy white ceramic |
cm 45 d.35 h.19 |
cm 43 d.33 h.14 |
countertop |
central, on countertop |
yes |
| Movado 58 - glossy white ceramic |
cm 58 d.35 h.19 |
cm 55 d.33 h.14 |
countertop |
central, on countertop |
yes |
| Nice 60 - glossy white ceramic |
cm 60 d.40 h.12,5 |
cm 58 d.28 h.10 |
countertop |
on washbasin |
no |
| Nice 80 - glossy white ceramic |
cm 80 d.40 h.14 |
cm 78 d.28 h.10 |
countertop |
on washbasin |
no |
| Paola - matt white Mineralguss |
cm 60 d.34,5 h.16,5 |
cm 59,5 d.33,5 h.13 |
countertop |
central, on countertop |
no |
| Smart - matt white Tekor |
cm 53,5 d.39,5 h.15 |
cm 46,5 d.33 h.10 |
countertop |
central, on countertop |
yes |
| S20 - glossy white ceramic |
cm 55 d.45 h.17 |
cm 47,5 d.30 h.12 |
countertop |
on washbasin |
yes |
N.B. The mixer hole has a standard diameter of 3,5 cm.
It is recommended to use a Waste Drain with continuous flow with the basins that come without an overflow hole.
The measures of all ceramic washbasins can change (specifically aboout 0,8%) due to mould wear or slight variations of the technical feature of the raw materials that make up the dough.
Optional
splashback panel: for tops in stratified HPL, marble or gres stone; particularly for walls which are not perfectly lined up and for supporting a mirror.
internal shaped metal drawer: available for all models with metal basket; the drawer is positioned around the centre of the washbasin cabinet and is shaped to allow space for the drains.
organiser: dividing system inside the Legrabox drawer. Available in a Canaletto Walnut or Orion Grey finish.
Maintenance Tips
Melamine: for cleaning, please use neutral liquid detergents. To remove limescale spots use a sponge wet with vinegar or an anti-limescale product, wash and then dry out. Do not use acid products or abrasive duties; do not leave the anti-limescale agents on the surfaces for too long, in order to avoid stains.
Stratified HPL: clean the surface with a soft, damp cloth, without scrubbing so as not to damage or scratch the surface. It is recommended that you only use neutral cleaning products. Do not use substances which are abrasive, scratchy, acidic, salty, intended for metal, or concentrated anti-limescale. Avoid contact with boiling water. Avoid steam cleaning.
Lacquer: clean with soft non-abrasive cloths to avoid scratching the surface. Do not use products containing solvents, acetone or abrasive agents. Avoid silicon, alcohol and wax based products.
Wood: a "living" material with superficial varnish protection; to be cleaned with a soft non-abrasive damp cloth. It is recommended to clean the top in the direction of the veining. Dry with care.
Stone: in order to avoid staining, clean regularly with a damp cloth and neutral cleaning products.
Tekor: in order to maintain Tekor, simply use soapy water or common, slightly abrasive detergents with a cotton cloth or a slightly abrasive sponge, making sure to dry the surfaces carefully. Avoid putting objects on the surface which are very hot or aggressively acidic, and avoid using a mix of solvents. Damage can however be repaired by a specialised craftsperson.
QTOP: unlike marble-resin, the mineral filler is not chemically attackable by acids. The products recommended for cleaning must not have a high alkalinity (basic pH), which could alter the binding resin, mainly from an aesthetic point of view. The best way to prevent stains is to remove them promptly with a damp cloth or neutral detergents before they harden.
Minera-Kolor: to remove most dirt and stains, washing powder combined with an abrasive sponge or a common chlorine or bleach cleaner is sufficient. For the removal of stains caused by limescale, the use of a common limescale remover is recommended. To maintain the original opacity of the item, occasionally clean with amuchina or a 1/20 solution of bleach diluted in water. To enhance the typical satin opalescent finish, occasionally wipe with an abrasive sponge, applying a circular motion.
Further Information...
Gres: grès stoneware is the result of a water and clay mixture that, through the extrusion process, changes into a plate with extraordinary mechanic properties. The vitrification closes the orifices and guarantees the highest resistance to water and stains.
Tekor: a mineral compound covered with a layer of resin which gives it both physical and chemical resistance.
QTOP: it's a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.
Minera-Kolor: is composed of natural mineral fillers (calcium carbonates and aluminium trihydrates) bound by a low percentage of polyester resin: a material that is therefore elegant to the touch, hygienic and suitable for bathroom furnishings. The technical enamel covering the surface of the material is matt coloured, with excellent physical and chemical resistance. It is resistant to boiling water and changes in temperature. Any colour variations that have arisen through use can be easily removed by simple cleaning, using a lightly abrasive sponge in a circular motion.
