Specific Model and Measurements
Bed Model
|
Bed Measurements
|
Slatted Base
|
Mattress
|
French double |
cm 155,5 x 223,5 |
cm 142 x 202 |
cm 140 x 200 |
Italian double |
cm 175,5 x 223,5 |
cm 162 x 202 |
cm 160 x 200 |
|
|
|
|
sprung mattress: internal springing made of steel with 2,20 mm thread and 1,30 mm steel spirals, insulating felt 1000 gr/m2, D21 resin layer on both sides with a thickness of 1,5 cm, padding in hypoallergenic fibres 320 gr/m2 and polyester fabric cover, perimetrical structural frame, packed in a nylon bag.
memory mattress: core in polyurethane water foam with density 30 kg/m2, 4 cm thick memory layer, padding in hypoallergenic fibres 320 gr/m2 and polyester fabric cover, packed in a nylon bag.
customer mattress: the mattress must weight between 25 and 30 kg for double mattresses; between 20 and 25 kg for the large single and between 15 and 20 kg for the single model.
Technical Specifications and Equipment
sides, tops and bottoms: class E1 melamine panel, 2,5 cm thick. Bottoms come with adjustable height feet.
doors and backs: class E1 melamine panels, 1,8 cm thick.
table: class E1 melamine panel, 2,5 cm thick. Metal leg painted with epoxy powders. It is equipped with anti-tip system, it must be fixed to the bed front.
desk: E1 melamine panel, 2,5 cm thick. It is equipped with anti-tip system, it must be fixed to the bed front.
slatted base: epoxy powder painted slatted base, beech wood slats and anti-twist system.
mechanism: equipped with braking system assembled on metal plates painted with epoxy powders.
Materials Specifications
matt lacquer: sides and front are finished in matt lacquer on both sides; top and bottom are lacquered on the internal side only.
gloss lacquer: sides and front are finished in gloss lacquer on the external side and in matt lacquer on the internal side; top and bottom are finishes in matt lacquer on the internal side only.
Assembly Tips
For safety reasons it is mandatory to fix it to a brick wall.