Lounge Bar
Bespoke Wall System

Lounge bar unit for a modern living room. Wine-glass racks, smoked-glass shelves and internal LED lighting. Cupboards, drawers and custom height.

* Required Fields


From €5,269.75
Wishlist

Description

Lounge Bar is a bar unit for a modern living room, featuring hinged cupboard doors, drawers and a customised height up to 295 cm. This unit is available in a wide range of finishes in lacquer or wood, with a selection of texture effects also available for the surface of the front panels.
Lounge is characterised by its minimalist and functional design, ideal for creating a lively and comfortable atmosphere in your living area. The bar compartment features racks for storing wine glasses of different shapes and sizes, a practical smoked-glass shelf, and a mirror on the back panel.

Characteristics
living-room drinks cabinet, 170,5 cm in width
bar compartment is 76,4 cm in height and features an internal LED lighting (optional)
pleasant contrast between the materials on the front panels and the bar compartment
front panels can be smooth, with carvings, metal insert or plissè effect
internal shelves can be purchased for the cupboards in the Lounge internal accessories product page

Model and Measurements
Model:
- with n.3 lower cupboard doors + n.3 upper cupboard doors
- with n.2 lower cupboard doors + n.4 central drawers + n.3 upper cupboard doors
Width:
- composition: cm 170,5
- bar compartment: cm 140,7
Depth:
- overall cupboard unit: cm 40,4
- body: cm 38
- front panels: cm 2,4
Height:
- bar compartment: cm 76,4
- composition: cm 186 (min) / cm 295 (max)

Materials and Finishes
Front and Side Panels:
- matt / metallic / glossy lacquer
- open-pore oak / aged oak
Bar Compartment:
- matt / metallic lacquer
- open-pore oak
Interior:
- melamine

Purchase Information
The positioning of the Lounge wall system with bar compartment vano bar can be used independently or positioned at the beginning, centre or end of a series of open column units, column cupboards, or other products from the Lounge collection.
To calculate the total size of your wall system, simply add the width of the Lounge Bar unit to that of the other columns or elements from the Lounge collection.

Matt or Glossy (where available) lacquer finish with colours from the RAL, NCS and Sikkens charts are available for this product.
To get it, configure your furniture with "Matt Lacquer" or "Glossy Lacquer" finish and add to your Basket the "Matt / Glossy Lacquer Samples cod.olv" product card, which you can find among the alternative products at the bottom of the page.
Please note: since the surcharge is intended on the entire supply of the cod.olv collection, only one addition to the Basket is required even in the case of more than one product from this collection to be lacquered.

Technical study

Technical Specifications and Equipment
Structure: made from TAMMEL (honeycomb panel + melamine). The honeycomb panel has a frame made from carefully selected solid pine and the honeycomb plated with panels of Royal, Alpha or Grafis MDF. Guarantees durability, lightness, practicality and meets all the requirements of the European Class 1 Standards regarding the limitation of harmful emissions of formaldehyde, meets the CARB2 standards.
Side and Back Panels: made from melamine (E1 class with low formaldehyde emission), meets the CARB2 standards. The side panels are cm 2,5.
Base and Top: honeycomb panels, 2,5 cm thick.
Doors / Drawers: honeycomb panels, 2,4 cm thick, with a frame made from solid pine, lacquer or wood. The front panels can be smooth or personalised (only for finishes in matt lacquer, open-pore oak wood, aged oak wood):
- Shanghai (only in matte lacquered finish): diagonal "V" incisions 0.2 cm thick.
- Line (only in matte lacquered finish): vertical "V" incisions 0.2 cm thick 
- with metal insert: cm 1 thick 0,2 in "version 1" with n.2 horizontal + n.1 vertical or in "version 2" with n.1 horizontal + n.1 vertical. Also available in the 2:2 version with a matt lacquered metal or metal insert 2 mm thick, protruding 2 mm from the door. Only available when purchased with a project, for further information please contact our Customer Service.
- Plissè: slats in lacquered solid wood or oak veneer with 30° processing: cm 4,5 thickness 1.
- 10:10 (only in matte lacquered finish): "U" incisions cm 1 thickness 0,2 thick.
- 80:40 (matte lacquered finish only): "U" incisions cm 1 thickness 0,2 with variable spacing
- 10:2 (only in open-pore oak finish): vertical "V" incisions cm 0,2 thick.

Doors also available in TAMMAS (honeycomb + solid wood), honeycomb with solid spruce frame and solid wood honeycomb plated on both sides, dyed in the sample finishes and decorated with 10:10 or Wave processing. Only available when purchased with a project, for further information please contact our Customer Service.
Handles: push-pull system or full-height Gap groove handle.
Hinge: metal hinges in titanium finish with soft-closing mechanism. Standard opening angle of 110°, upgradeable to 155° except on the plissé finish, which comes exclusively with a 94° angle hinge.
Bar Compartment: in MDF, 1,8 cm thick, composed of:
- n.1 lacquered wine-glass rack angled at 45°: cm 140,7 d.28 h.2,5;
- n.1 smoked glass shelf: cm 140,7 d.34, 0,8 cm thick;
- n.1 mirror on back panel: cm 140,7 x 76,4

Optional - open compartment
internal LED lighting: positioned on the upper panel of the bar compartment and on the wine-rack shelf, 1 cm from the back panel along the entire width of the bar compartment, can be equipped with a transformer (20W) which is switched on/off with a switch-controlled socket or a touch switch. LED with heat graduation of 3000K-24V.

Assembly Tips
Hardware pre-mounted on all elements to facilitate and speed up the assembly process. The hinged doors are equipped with n.4 slow-closing metal hinges and a rubber dust stop. The feet, which are also pre-mounted on the stands, allow for the correct levelling of the unit.

To assemble the body of the cupboard, you will need:
- 4 cm in width (if assembling in a 2 cm alcove)
- 3 cm in height

Further Information...
Honeycomb Panels: panel made with an internal honeycomb structure and a perimeter frame of 5 / 7 cm made from top-quality solid pine, closed with 2 panels in MDF (0,3 / 0,4 cm thick) which are subsequently lacquered and veneered.
The strengths of honeycomb panels are:
- greater durability over time;
- greater resistance to load;
- significantly reduced weight of the panels (up to 60% less), useful for transport, assembly, moving or removals, but especially to reduce the weight of the doors on the structure and hardware;
- hardware always fixed on the perimeter (in solid fir wood) of the sides and doors, so hinges will have a higher resistance and the furniture will have a considerably longer life;
- better resistance to humidity, as the material "breathes";
- product is exclusively "100% Made in Italy".
Aged Oak: compared to the "standard" open-pore oak, aged oak is characterised by a slightly more brushed surface, which shows a deeper pore and a more marked grain. This difference is particularly noticeable on bigger surfaces such as tables, wall units and wardrobes, less so on accessories, beds and bedroom sets.

Video

Additional Information

Area of Production
Italy
Assembling
Medium Assembling
Assembling Instructions
Download the Assembly Instructions
Weight
from 132 to 185 Kg
Cubic Metres
from 0,55 to 0,71 m³
Other Products from the same Collection
View all the products of the collection (cod.olv)

Partner Factory

This piece is made by a prestigious Italian company which has operated within the furniture industry since 1929. The company began as a carpentry workshop, before transforming into a furniture factory in 1949. Over the years, thanks to collaborations with well-known architects and designers, it has acquired fame at both a national and international level. The headquarters are located in Emilia Romagna, but the company is now recognised and valued in over 50 countries around the world.
True to their roots, the company catalogue centres around high-quality, modern furniture and accessories which are mostly made from wood. In particular, there are several pieces of furniture featuring skilfully-crafted wooden facades and doors with pleated details, consisting of vertical slats arranged in a regular pattern. The catalogue reflects modern trends and ways of living, offering customisable and durable options for every room of the house. Furniture solutions for the living room include wall units, tables, sideboards and cupboards. The bedroom furniture range features numerous models of wardrobes, beds and storage units.
As well as furnishing private homes and villas, this prestigious ‘Made in Italy’ company is committed to the design and manufacturing of quality contract furniture, particularly for hotels, showrooms, housing complexes and renowned offices around the world.

High quality Italian furniture for the living and bedroom area

You may also like