Technical Specifications and Equipment
The bathroom vanity includes:
2 washbasin bases with 2 drawers (each) cm d.50 h.58, customizable in width from a minimum of 75 cm to a maximum of 90 cm (each). The upper drawers are shaped to allow the insertion of the siphon. Soft-closing mechanism.
1 top in stratified HPL cm d.51 th.1,2, made to measure in width from a minimum of 150 cm to a maximum of 180 cm. The top is equipped with an integrated double free-flow basin and a double hole for the mixer tap. Each basin has the following dimensions: cm 46 d.32 h.12 / 14,5.
1 mirror with led backlighting, cm h.81, made to measure in width from a minimum of 150 cm to a maximum of 180 cm. The mirror will be made in the same width as the top.
The shelving unit includes:
1 back panel cm 46 h.63 th.2,5 with 2 shelves cm 45 d.15 th.1,5
1 lower "C" shaped element cm 46 d.25 h.68
1 upper "C"-shaped element cm d.25 h.44, upper shelf with led, made to measure from a minimum of 196 cm to a maximum of 226 cm.
Maintenance Tips
Use a soft, damp cloth to remove any deposits of dust or other dry material, without scrubbing to avoid scratching or abrading the top. Clean the surface with diluted, non-abrasive detergents and a soft, non-abrasive sponge. Rinse thoroughly with clear lukewarm water and dry thoroughly with a soft, dry cloth or sheets of kitchen roll. To remove limescale stains, use ordinary kitchen vinegar and leave it on the affected area for up to 5 minutes, then rinse and dry thoroughly.
For More Information...
Stratified: This is a thick (10 mm) laminated HPL made up internally of layers of cellulose fibres impregnated with phenolic resins. The outer layers are impregnated with heat-setting resins. The material is subjected to the polycondensation of the resins with strong pressure combined with the heat of 150° during pressing. The surface is rough to the touch. It is a material of innumerable virtues, which has a wide range of applications where a high level of hygiene is required. It is a non-porous material that does not generate mould or bacterial growth and is resistant to scratching, impact and wear. It is characterised by high resistance to chemical and organic agents and high impermeability. It is dust-proof, easy to clean, non-toxic and suitable for food contact, environmentally friendly, heat-resistant up to 170° and flame-retardant.
