Atlantic recessed d.45
Bathroom Vanity

Specific Measurements
3-door base unit cm 85: n.1 central door cm 35 + n.2 side doors cm 25.
Base unit with 3 doors cm 95: n.2 doors cm 35 + n.1 side door cm 25.
Base unit with 3 doors cm 105: n.3 doors cm 35.

Material Specifications
Structure: cm 1.8 thick particle board panels.
Fronts: doors, drawers and jumbo drawer made of 1.8 cm thick particle board panels. With a smooth lacquered finish, the front is made of 1.9 cm thick MDF.

Technical Specifications and Equipment
Structure: characterised by free back for the passage of drains.
Drawers / Legrabox drawer: fitted with a metal frame characterised by straight drawer sides both internally and externally, only 1.28 cm thick. Full-extension runners and slow-closing mechanism.
Doors: fitted as standard with Smoove hinges that allow slow closing.
Handles: you can choose from various models of handles, as well as push-pull opening.
The handles cod.152-, cod.16- and both metal profiles are available in a matt lacquered finish in all the colours of the sample collection.
The handles mod. 68- protrude 4 cm from the surface of the door.
Feet cm h.10: with rectangular or shaped section available in chrome, satin nickel, black lacquered, matt lacquered or sandblasted lacquered metal in all sample colours; the wall-hung base unit cm h.75 thus becomes a floor-standing unit cm 85 high (excluding the height of the washbasin and thickness of the top).
Feet cm h.12: with a square section available in satin nickel metal, matt lacquered or sandblasted lacquered in all the colours of the sample collection; the wall-hung base unit cm h.75 thus becomes a floor-standing unit 87 cm high (excluding the height of the washbasin and thickness of the top).
Feet cm h.20: with square section available in satin nickel metal, matt lacquered or sandblasted lacquered in all the colours of the sample collection; the wall-hung base unit cm h.62,5 thus becomes a floor-standing unit 82,5 cm high (excluding the height of the washbasin and thickness of the top).
Baseboard cm h.6 / 10 / 15: in aluminium or matt lacquered in all the colours of the sample collection; the wall-hung base unit cm h.75 thus becomes a floor standing unit cm 81 / 85 / 90 high (excluding the height of the washbasin and thickness of the top).

N.B. The mixer hole has a standard diameter of 3.5 cm.
For washbasins without an overflow hole, the use of a continuous drain is recommended.

The indicated measurements of all ceramic washbasins may be subject to a dimensional variation (specifically about 0.8%) due to wear and tear of the moulds or to small variations in the technical characteristics of the materials that make up the mix.

Optional
Shaped internal metal drawer: available for all models with metal drawer; the drawer is positioned approximately halfway along the washbasin base unit and is shaped for the passage of drains.
Splashback: designed to complete bathroom furniture with tops in stone, Qtop, stoneware, HPL or resin; particularly suitable for walls that are not perfectly square and for combination with free-standing mirrors.
Organiser: internal subdivision system for Legrabox drawer and basket. Available in Orion Grey finish.

Maintenance Tips
Veneered: use neutral liquid detergents for cleaning. To remove limescale stains, wipe the top with a sponge soaked in vinegar or anti-limescale product, then rinse and dry. Do not use acids, abrasive products or powders; do not leave anti-limescale products in contact with the top for a prolonged period of time, as this could create halos.
Layered HPL: for maintenance, the top must be cleaned with a soft, damp cloth, without scrubbing in order not to scratch or abrade the top. We recommend the use of neutral detergents. Do not use abrasive or scratching substances, strong acids or salts, metal cleaners and concentrated limescale removers. Avoid contact with boiling water, avoid using steam cleaners.
Lacquer: use soft, non-abrasive cloths for cleaning to avoid damaging the surface. Do not use products containing solvents, acetone or abrasives, nor wax, alcohol or silicone-based products.
Wood: "living" material protected superficially by varnish; for cleaning, use a soft, non-abrasive, damp cloth well wrung out. It is recommended to clean the top in the direction of the grain and dry carefully.
Stone: to prevent stains, clean promptly with a damp cloth or neutral detergents. The use of neutral detergents is recommended.
Tekor: for maintenance, the use of soapy water or common mildly abrasive detergents with a cotton cloth or mildly abrasive sponge is sufficient, taking care to rinse the surface thoroughly. Avoid very hot objects, very aggressive acids or combinations of solvents. Any damage can however be repaired by a specialised craftsman.
Mineralguss: for cleaning, use a sponge with water and a normal cream detergent. The surface of the top must not be in contact with solvents and alkaline lotions such as ammonia. Hair dye products must not stagnate in the basin and must be rinsed off immediately. Never fill the basin with hot water above 60°C.
Corian®: Soapy water or common ammonia-based detergents are sufficient for maintenance, taking care to rinse the surface thoroughly. Avoid contact with chemicals or solvents, in which case please rinse the surface immediately with running water. Nail polish should be removed with a non-acetone nail polish remover and then rinsed with water. Minor damage, including scratches, stains including from chemicals, burn marks and small impact nicks, can be repaired directly using the Scotc Brite abrasive sponge.
QTOP: unlike marble-resin, mineral filler is not chemically attacked by acids. the products recommended for cleaning must not have a high alkalinity (basic pH) that could alter, mainly from an aesthetic point of view, the binding resin. The best way to prevent stains is to remove them promptly with a damp cloth or neutral detergents before they harden.
Minera-Kolor: to remove most dirt and stains, powder detergent combined with an abrasive sponge or a common chlorine or bleach cleaner is sufficient. For the removal of stains caused by limescale, the use of a common limescale remover is recommended. To maintain the original opacity of the artefact occasionally clean with amuchina or a 1/20 solution of bleach diluted in water. To enhance the typical satin opalescent finish occasionally wipe with an abrasive sponge, applying a circular motion.

Read more...
Porcelain stoneware : Porcelain stoneware is made from a mixture of water and clay that is transformed, through the raw extrusion process, into a slab with extraordinary mechanical properties. Vitrification closes the pores, ensuring maximum resistance to water absorption and stains.
Tekor: a mineral compound coated with a resin film that provides both physical and chemical resistance.
Mineralguss: a material composed of calcium carbonates and aluminium trihydrates, bound by a low percentage of polyester resin. The surface is coated with a gelcoat film that offers excellent physical and chemical resistance. The compound is ductile and heat resistant. Any colour variations caused by high temperatures can be removed by cleaning with a lightly abrasive sponge and subsequent polishing.
Corian®: non-porous, homogeneous, inert and non-toxic material, available in 12 mm thickness, consisting of approximately 1/3 acrylic resin (also known as polymethyl methacrylate or PMMA) and approximately 2/3 natural minerals. The main mineral is aluminium trihydrate (ATH) derived from bauxite, a mineral from which aluminium is also obtained.
Being non-porous, Corian® surfaces are particularly hygienic, which is why it is used to make kitchen worktops, vanity tops, walls for bathrooms and showers, wall tiles and counters for public spaces such as healthcare, shops, hotels, restaurants and offices.
QTOP: is a quartz-resin product consisting of natural materials (quartz and granite) and a high-quality binding agent, supplemented with coloured pigments and glass or mirror granules.
Minera-Kolor: it is composed of natural mineral fillers (calcium carbonates and aluminium trihydrates) bound by a low percentage of polyester resin: a material that is therefore elegant to the touch, hygienic and suitable for bathroom furnishings. The technical enamel that covers the surface of the material is matt coloured, with excellent physical and chemical resistance. It is resistant to boiling water and temperature changes. Any colour variations that have arisen through use can be easily removed by simple cleaning, using a lightly abrasive sponge in a circular motion.