Quilted Bed

Iguana bed with an asymmetric tufted headboard, the bed is upholstered in fabric, velvet or faux-leather and is also available with optional box.

* Required Fields

From €1,098.60


Iguana bed with an asymmetric tufted headboard is covered in fabric, velvet or faux-leather.
The large headboard widens at the bottom including the bed, just as the bed frame that widens downwards in a soft curve. The peculiar and unique feature is the headboard that is enriched by asymmetric seams without buttons and geometric patterns for an updated innovative tufted effect: free, soft and natural.
The bed is available with or without the storage box which is fitted with a single or double lift-up mechanisms of the bed base in order to optimise spaces within the bedroom.

soft lines for a modern, free, natural tufted effect
totally removable cover finished also on the back of the headboard
also ideal in the middle of the room
optional Clean Up System in storage versions

Model and Measurements
Models: single, large single and French, standard double and king size
Width adn Depth:view the available sizes in the Menus
Headboard Thickness: cm 18
Headboard Height: cm h.114

Materials and Finishes
- fabric, velvet, faux-leather (totally removable)

Information for your Purchase
Mattress not included. You can find a suitable mattress in our mattress department. Match the bed with a mattress with the same sizes of the bed base.

Technical study

Model and Specific Measurements
Bed frame:
- single: cm 117 h.34
- large single: cm 147 h.34
- French double: cm 167 h.34
- standard double: cm 187 h.34
- king size: cm 207 h.34

Technical Specifications and Equipment
Bed base: 68mm thick slats made of steamed beech plywood bent by warm with low formaldehyde emission. The slats are connected to the metal frame with silicon rubber mounts. The steel frame is at square section mm 40 x 30. Painting with epoxied powders.
Structure: fir solid wood and/ or caged in birch plywood. 18/25 mm thick panels made of particle birch wood in E1 class of low and natural wood fibre .
Filling: crushproof polyurethane foam with different firmness, density from 18 to 40 Kg/m³. First layer made of polyester foam joined with grabbing interliner made of poyester and/or batting polyester at 100% of 200 gr.
Headboard Back: The bed is fully finished even in the back with the same cover of the bed, so that the bed can be placed in the middle of the room.
Storage box: mm 12-14 thick panels made of particle birch wood in E1 class.
Simple Lift-up base: traditional mechanism certified and tested up to 5.000 cycles, allows you to lift the bed base at 45°. Metal structure painted in epoxied powders with gas springs set on mattress weight.
Double Lift-up base: tested up to 4.000 cycles with assisted mechanism, allows you to lift the bed base at 45° and then raised it flat at a convenient height (m h.1). In this way, you can access the box easily and don't have to bend over the bed to make it or get into uncomfortable positions. Metal structure painted in epoxied powders with gas springs set on mattress weight.

Basic standard: n.4 feet made of regenerated or recyclable polypropylene, available in wengé, black, white or silver. Height cm 3.
Lux: n.4 L-shaped feet for overall sizes of cm 18 x 18 h.3. Available in natural birch wood in wengé, black, matt white or chromed.

remove the bed base: you can purchase a bed without bed base only for the models without storage box.
set of angular supports: available for models with mechanical bed base or without bed base. The supports allows you to adjust the height of the bed base and have a mattress that is more or less deep than the bed frame. The three heights for the position are: cm 5, cm 6 and cm 12.
accessory bag: elegant, convenient and useful solution that is applied with Velcro at the bed frame. The different compartments are divided in order to store up magazines, books, tablets, mobiles, headphone or glass cases.
Clean Up System: it is a mechanism that allows you to lift the storage bed models and move the whole structure,without effort, by operating two hidden levers assembled on the sides of the bed frame. In this way, 4 no-marks rubber casters lower down and the whole bed is raised of cm h. 13 and can be move back and forth effortlessly. When the levers are lowered down, the casters disappear and the bed rests again on its feet. Easy, handy and safe.

Assembling Tips
Easy to be assembled, provided with instructions and maintenance .
The bed is delivered with the mechanisms already fastened onto the side rails of the bed for the storage beds and the covered headboard. Provided with Catas certification, the Italian institute for certification, research and tests in the wood furniture and industrial field.


Additional Information

Area of Production
Not exportable to the United Kingdom, EIRE and USA.
Easy Assembling
Assembling Instructions
Download the Assembling Instructions
Cubic Metres
from 0,60 to 1,2 m³
Other Products from the same Collection
View all the products of the collection (cod.fls)

Partner Factory

This product is manufactured by a company set in Friuli region (Northern east of Italy) specialised in the production of upholstered product for more than 20 years. Their catalogue gathers padded items for the sitting and bedroom such as linear sofas, corner sofas or sofas with chaise longue together with single or double beds in fabric, velvet or faux-leather. The wide variety of products and the several covers available make these products highly bespoke.

The production is entirely made in Italy by the hands of skilled artisans that work at the same time with an industrial perspective by using modern techniques and high quality materials: from microfibres to natural yarns like cotton, linen, stain-resistant fabrics, fireproof or flame-retardant. This company belongs to Livenza furniture district certified by Emas which guarantees eco-friendly manufacturing procedures.

Valuable sofas and upholstered beds

You may also like