Material Specifications
Top, shelf, bottom, back panel: made of particle wood panels class E1 with low formaldehyde emission.
Sides and Partitions: made with particle wood panels, class E1 with low formaldehyde emissions or with aluminium frame painted with epoxy powders.
Technical Specifications and Equipment
Sides and partitions: thickness cm 2,5.
- Panel version:
with ABS edge in textured melamine or in matt lacquer. Feet built-in the thickness of the panel and adjustable by 1,5 cm.
- Frame version:
in aluminium with cm 4,5 x 2,5 upright and cm 3,5 x 2,5 crosspieces, matt lacquered in brown or gunmetal. Feet built-in the thickness of the panel and adjustable by 1,5 cm.
Top, shelf and bottom: thickness cm 3,5. Edge in ABS in textured melamine or matt lacquer.
Bars for clothes: rectangular section cm 3 x 1 in Gunmetal painted metal (for finishes: nature loto, textured linen and medium elm) or Brown (for finishes: taupe loto, terra loto or dark elm).
Back Panel: thickness cm 0,8 in textured melamine or matt lacquer. Only available with the linear double-sided module with back panel.
Back panel finished on both sides: thickness cm 2,6 in textured melamine, matt lacquer, covered in faux-leather or mirror.
Usable internal height:
- for walk-in closet cm h.223,6: cm 216,6
- for walk-in closet cm h.239,6: cm 232,6
- for walk-in closet cm h.255,6: cm 248,6
- for walk-in closet cm h.287,6: cm 280,6
Sides Holes
- Panel version:
sides and partitions have fixed holes each 9,6 cm.
- Frame version:
sides and partitions have racks on the frame uprights each 3,2 cm, the ranges correspond to the holes on the wooden sides/partitions.
For detailed measurements please check the scheme in the picture gallery.
Assembling Tips
For the assembling of the structure you need:
- in width cm 3,5
- in heigth cm 2 (cm 5 if the wardrobe is equipped with LED bars, the power supply will be placed on the top of the wardrobe).
