Lounge Interior fittings D.38 for hinged, sliding and flush wardrobes

Wooden shelf available in melamine, matte lacquer and metallic or oak finishes

Wooden shelf with leather-covered top in your choice of rope or dark brown colors

Wood shelf equipped with horizontal LED bar (the image shown refers to cabinets with a depth of 61.6)

Wooden shelf fitted with horizontal LED bar

Close up detail of the external vertical LED bar positioned on the side, which can be used near an open module

The external vertical LED bar positioned near an open compartment with overhanging doors creates a sophisticated lighting effect

'Vertical LED lighting positioned on the sides creates a subtle and even lighting effect on the interior

LED light incorporated into the metal dividing side panel

A) wooden shelves - A1) wooden shelves with leather top - B) glass shelves - B1) glass shelves with metal frame - B2) LED bar per shelf with metal frame

(A) horizontal LEDs - (B) LED bars on hat or shelf - (C) interior vertical LED bar - (D) exterior vertical LED bar - (E) interior and exterior vertical LED bars placement on side

+ 9

MORE IMAGES

Lounge Interior Accessories - D.38

Lounge Interior Accessories D.38 for hinged, sliding and flush wardrobes. Wood or glass shelves, clothes rack, mirrors and LED lighting.

* Required Fields

Wardrobe Type *

Hinged (per structure: cm d.38)
Sliding / Flush (per structure: cm d.38)

Module Width *

Module Width *

Equipment Type *

Equipment Type *

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractible Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractible Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

Additional Wooden Shelf

Equipment Model *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Equipment Model *

---------------CORNER
-----Shelf
Additional Wooden Shelf

Shelf Measurements *

Direction Corner Shelf *

Clothes Hanger Rod *

Extractable Cross-Hanger Rod

Inside Mirror for Door *

Rectangular: cm 36 x 180

Shelf Measurments *

cm 45,5 d.34 th.0,8

Shelf Measurements *

cm 51,5 d.34 th.0,8

Shelf Measurements *

cm 57,5 d.34 th.0,8

Shelf Measurements *

cm 69,5 d.34 th.0,8

Shelf Measurements *

cm 93,5 d.34 th.0,8

Shelf Measurments *

cm 105,5 d.34 th.0,8

Shelf Measurements *

cm 117,5 d.34 th.0,8

Shelf Measurments *

cm 45,5 d.34,2 th.3,2

Shelf Measurments *

cm 51,5 d.34,2 th.3,2

Shelf Measurements *

cm 117,5 d.34,2 th.3,2

Shelf Measurements *

cm 141,5 d.34,2 th.3,2

Shelf Measurements *

cm 57,5 d.34,2 th.3,2

Shelf Measurements *

cm 69,5 d.34,2 th.3,2

Shelf Measurements *

cm 93,5 d.34,2 th.3,2

Shelf Measurements *

cm 105,5 d.34,2 th.3,2

Take Note *

The external vertical LED bar can only be used in the vicinity of an open module, even one that is fitted with shelves or brackets.

Shelf Finishes *

Shelf Colour *

Placement *

in Cabinet with Full Sides / Dividers
in Cabinet with Framed Sides / Dividers +€136.21

Frame Finish *

Brown Aluminium
Metallic Lacquer +€113.51

Frame Colour *

Transformer for LED Bar * To learn about LED Bar consumption, see the Technical Section

No Transformer
n.1 Transformer with Door Opening Sensor (maximum power 30 W) +€68.10
n.1 Transformer with Door Opening Sensor (maximum power 75 W) +€113.51
n.1 Transformer with Door Opening Sensor (maximum power 150 W) +€181.61

Clothes Hanger Rod Finish *

Painted Aluminium
Brown Aluminium

Top Shelf Colour *

Optional - Lighting

LED Bar for Shelf +€113.51

Transformer for LED Bar * To learn about LED Bar consumption, see the Technical Section

No Transformer
n.1 Transformer with Door Opening Sensor (maximum power 30 W) +€68.10
n.1 Transformer with Door Opening Sensor (maximum power 75 W) +€113.51
n.1 Transformer with Door Opening Sensor (maximum power 150 W) +€181.61

Quantity

From €0.00

View Samples

Wishlist

Description

Lounge interior Accessories D.38 for hinged, sliding and flush wardrobes offer a customized solution for every storage and aesthetic need. The wide range of available accessories includes shelves in melamine, matte lacquer, metallic, open-pore oak wood, clear glass or smoked glass. Glass shelves are also available in a refined metal frame for a sophisticated and modern textural touch. In addition to additional shelves, the interiors of hinged, sliding and flush wardrobes in the Lounge collection can be enhanced with extractable hangers and interior door mirrors. Finally, customization is completed with LED lighting, available for both shelves, interior and exterior sides.

Features
Shelves, hangers, mirrors and LED lights for hinged, sliding and flush wardrobes
Wide range of available shelf finishes including melamine, oak, matte and metallic lacquer
Extractible transverse clothes rack
LED bars on shelves or on both interior and exterior sides

Materials and Finishes
- Melamine
- Matte Lacquered / Metallic
- Open-Pore Oak Wood
- Glass / Smoked Glass
- Metal
- Leather

Helpful Information
Some photos in the picture gallery show interior accessories available only in hinged, sliding and flush wardrobes with a depth of 61,6 cm (structure: 59,2 + door: 2,4 cm).

Matt or Glossy (where available) lacquer finish with colours from the RAL, NCS and Sikkens charts are available for this product.
To get it, configure your furniture with "Matt Lacquer" or "Glossy Lacquer" finish and add to your Basket the "Matt / Glossy Lacquer Samples cod.olv" product card, which you can find among the alternative products at the bottom of the page.
Please note: since the surcharge is intended on the entire supply of the cod.olv collection, only one addition to the Basket is required even in the case of more than one product from this collection to be lacquered.

Technical study

Technical Specification and Equipment
Wooden Shelf: cm d.34.2 th.3.2 honeycomb with a matching or leather-covered top (cm d.34,2 th.3,4) Fitted with LED bar
Smoked Glass Shelf: cm d.34 th.0,8
Transparent Glass Shelf with Frame: cm d.34,2 th.3,2 with Lacquered Metal Frame. Can be fitted with LED bar
Corner Shelf: iin honeycomb panel cm 87,7 x 87,7 o 108,9 x 87,7 th.2,5.
Extractible Transversal Clothes Hanger Tube: cm d.30 available in aluminium or brown.
Led Bar:
- Horizontal: placed on lid or shelf at a distance of cm 0.6 from the edge. Can be fitted with a transformer (maximum power supported 30 / 75 / 150 W ) with sensor ignition. Warm grade LED 3000K - 24V, consumption 11 W / m.
- Vertical: placed on sides and/or internal divisions of the modules: for lighting outside the modules the bars are placed at 6.5 cm from the fronts, while for lighting inside the modules are placed at 0.6 cm from the fronts. They can be fitted with a transformer (maximum supported power 30 / 75 / 150 W) and lighting by controlled socket (open compartments or clear glass doors) or sensor (for all other doors). Warm grade LED 3000K-24V, consumption 11 W - m.
Mirror: cm 36 h.180 in natural mirror glass finish. To be placed on the inside of the door.

Assembly Tips
Pre-mounted hardware on all elements to make assembly easier and faster.

Read more...
Honeycomb: is a panel made with an internal honeycomb structure and a 5 / 7 cm perimeter frame made of first-grade solid pine closed with 2 MDF panels of 0.3 / 0.4 cm thickness, which is then lacquered or veneered.
The advantages of honeycomb paneling are:
- Increased long-term durability;
- Increased resistance to loads;
- Significantly reduced panel weight (up to 60% less), which is useful both for transport, assembly, moving or relocation, but especially for reducing the weight of the doors on the structure and hardware;
- Hardware is always attached to the perimeter (solid pine) of sides and doors, so the hinges will have increased strength and the furniture will have a significantly longer life span;
- Improved resistance to moisture as the material "breathes".;
- An exclusively "100% Made in Italy" product.

Additional Information

Area of Production
Italy

Approximate Time
9 - 12 working weeks for production

Assembling
Medium Assembling

Assembling Instructions
Download the Assembly Instructions

Other Products from the same Collection
View all the products of the collection (cod.olv)

Partner Factory

This piece is made by a prestigious Italian company which has operated within the furniture industry since 1929. The company began as a carpentry workshop, before transforming into a furniture factory in 1949. Over the years, thanks to collaborations with well-known architects and designers, it has acquired fame at both a national and international level. The headquarters are located in Emilia Romagna, but the company is now recognised and valued in over 50 countries around the world.
True to their roots, the company catalogue centres around high-quality, modern furniture and accessories which are mostly made from wood. In particular, there are several pieces of furniture featuring skilfully-crafted wooden facades and doors with pleated details, consisting of vertical slats arranged in a regular pattern. The catalogue reflects modern trends and ways of living, offering customisable and durable options for every room of the house. Furniture solutions for the living room include wall units, tables, sideboards and cupboards. The bedroom furniture range features numerous models of wardrobes, beds and storage units.
As well as furnishing private homes and villas, this prestigious ‘Made in Italy’ company is committed to the design and manufacturing of quality contract furniture, particularly for hotels, showrooms, housing complexes and renowned offices around the world.

High quality Italian furniture for the living and bedroom area

Matt / Glossy Lacquer Samples cod.olv

Top

Contacts

Locations

Lounge Interior Accessories - D.38