Ambra
Upholstered Bed with Storage

Ambra upholstered bed with reversible headboard cushion. Available with a built-in storage box or with a slim bed frame raised off the ground.

* Required Fields


From €1,334.35
Wishlist

Description

Ambra is an upholstered bed with a double-sided, reversible headboard cushion which can be switched around to give the bed a different look. The cushions are fitted inside a cover, placed over the padded panel on the headboard and fastened with a titanium-finish toggle. As well as providing maximum comfort, these cushions have a decorative element; the two different sides allow you to choose between a two-tone or tone-on-tone effect for your bed.
Ambra is available with a h.5 or h.10 cm slim bed frame featuring tall legs, or alternatively with a built-in storage box. The storage box models come in two versions; a h.30 cm floor-standing version with partially concealed legs, or a h.25 cm version which is raised off the ground giving a light-weight effect without sacrificing practicality or storage space. The large storage compartment can be accessed easily and with minimal space in depth. There is a classic diagonal opening system or a double lift-up system which raises the bed base horizontally, facilitating the making of the bed.
Ambra is available as a standard or french double, single, small double, king size or super king size with a 200 cm base.
The upholstery is available in a wide range of fabrics, velvet, faux-leather or real leather; the fabric and leather upholstery covers can be fully removed from all parts of the bed. The bed frame can also be customised with sartorial workmanship and different leg models.

Characteristics
7 widths available from single to super king size
bed with double-sided, reversible headboard cushions
spacious storage compartment with simple or double lift-up system
bed with tall legs and built-in storage box for a lightweight effect without sacrificing the space-saving solution
upholstery available in a wide range of fabric, leather and faux-leather
100% Made in Italy - artisan quality product

Model and Measurements
Models: single, small double, doubles: french, standard, king size and super king size
Width and Depth: please see all available measurements in the Configurator
Bed Frame / Bed Base / Headboard Height:
- Extra-Slim bed frame: cm h.5 / cm h.29 / cm h.98
- Slim bed frame: cm h.10 / cm h.30 / cm h.102
- Medium bed frame: cm h.25 / cm h.37 / cm h.105
- Large bed frame: cm h.30 / cm h.35 / cm h.98

Materials and Finishes
- fabric, faux-leather (fully removable)
- leather (fully removable; one side of cover always fabric)
In addition to the wide range of materials in the Material Samples, Ambra is also available in four fabrics offered at a promotional price.

Information for your Purchase
Mattress not included. You can find a suitable mattress in our Mattresses section. For all models, the mattress size corresponds to the indicated size of the bed base.

Technical study

Technical Specifications and Equipment
Headboard: made from particle wood and plywood with padding in D25 crushproof polyurethane foam covered in high-resilience acrylic wadding. Total thickness is 8 cm, total encumbrance with cushions is 23 cm.
Bed frame: made from plywood with D25 crushproof polyurethane foam padding covered in acrylic and velvet wadding. Total thickness is 6 cm.
Bed base: 13 birch-wood slats per side, class E1, with anti-squeek supports; 40x30 mm steel frame painted with non-toxic epoxy powders. Available in a split base version and with sliders for adjusting the stiffness in the lumbar area. For the 200x200 cm size, the Deluxe base is standard: 14 birch-wood slats per side, class E1, with anti-squeek supports and sliders for adjusting the stiffness in the lumbar area; 50x30 mm steel frame painted with non-toxic epoxy powders. A standard bed base is always assembled if a split bed base is chosen.
Storage box: the internal height of the compartment is equal to 18 cm; the 11 metal support points allow the storage box to support a weight of up to 75 kg/m2. The bottom panels can be raised for easier cleaning underneath the bed; rope handles. There is a simple lift-up system which allows you to pull the bed base up in a diagonal direction at an angle between 35° and 40°; the double lift-up system lifts the bed upwards while keeping it horizontal, protruding form the bed frame by only 10 cm in depth.
Pistons: the lift-up system is equipped with 1100N pistons that work at best with a mattress of around 40kg. For the king-size model 180 x 200 cm you can opt for the optional enhanced pistons 1250N that can support a max of 55 kg. For the super king-size model with slatted base 200 x 200 cm the standard included pistons will be the enhanced ones of 1250N; for heavier mattresses we recommend the optional lift-up system with 4 pistons.

Optional:
Base cover: available for the versions with storage compartment to protect the mattress from wear and dust on the part that comes in contact with the section of the base that opens. Available for a standard base without rigidity regulators.
Recessed mattress: if you choose a h.25 or h.30 cm mattress, there is the option to sink the mattress by 6,5 cm into the bed frame.

Stitching and Upholstery:
The upholstery cover is available in fabric, faux-leather or leather; in the leather version, one side is always in fabric.
The upholstery on the bed frame can be smooth, or can feature an insert on the corners which matches the second side of the headboard cushions.
Given the natural patterns of leather, there may be differences in the upholstery stitching on leather beds and fabric beds.

Legs:
For a h.5 / h.10 cm bed frame:
Standard: straight tube in black, white or natural wood; h.24 / 20 cm.
Mod. A: sloped, vase-shaped in black, white or natural wood; h.24 / 20 cm.
Mod. B: straight, vase-shaped in black, white or natural wood; h.24 / 20 cm.
Mod. E: clear plexiglass; h.24 / 20 cm.
Mod. T: titanium metal tube; h.24 / 20 cm.
Mod. U: titanium metal blade; h.24 / 20 cm.

For a h.25 cm bed frame:
Standard: sloped, vase-shaped in black, white or natural wood; h.12 cm.
Mod. F: straight tube in black, white or natural wood; h.12 cm.
Mod. Q: slim, in black metal or satin-finish stainless steel; h.12 cm.
Mod. S: titanium metal blade; h.12 cm.
Mod. V: clear plexiglass; h.12 cm.

For a h.30 cm bed frame:
Standard: tube in black, white or natural wood; h.5 cm.
Mod. N: square, in black, white or natural wood; h.5 cm.

All leg models can be lacquered in RAL colours for an additional cost.

Video

Additional Information

Area of Production
Italy
Assembling
Medium Assembling
Other Products from the same Collection
View all the products of the collection (diotti.com)

Partner Factory

diotti.com upholstered beds are manufactured in a qualified factory based in the area between Veneto and Friuli region. The whole manufacturing process is carefully handled internally in order to maintain the Quality control over every detail: the sturdy structure of each bed is covered in different materials and comes in a variety of shapes enhancing the wide experience of master craftsmen.
Designed and made in Italy, diotti.com beds possess the quality standards of handmade manufactures and show care for details. The covers are tailored with a bespoke quality in order to highlight every detail and they come from the best Italian manufactures.

diotti.com is a collection of modern house furniture: high degree of customization, design and 100% Made in Italy manufacturing quality are matched together in unique furniture solutions, contemporary in their design and reliable through time.
diotti.com is the only home design brand available exclusively online: convenient, transparent, always reachable and with the best value for money.

You may also like