Technical Specifications and Equipment
Wooden Shelf: in honeycomb panel (34,2 cm in depth, 3,2 cm thick) with matching top or top upholstered in hide leather (34,2 cm in depth, 3,4 cm thick). Can be equipped with an LED bar.
Smoked Glass Shelf: 34 cm in depth, 0,8 cm thick.
Clear Glass Shelf with Frame: 34,2 cm in depth and 3,2 cm thick, with frame in lacquered metal. Can be equipped with an LED bar.
Glass-Rack Shelf: 28 cm in depth and 2,5 cm thick, with grooves to hold the glasses.
Tilted Bottle-Rack Shelf: 3,6 cm in depth and 2,5 cm thick (total height: 8,5 cm) equipped with a support surface at the top and bottom (with grooves for the necks of the bottles) in lacquered metal.
LED bar:
- horizontal: 0,9 cm, positioned on the upper panel or on a shelf, at a distance of 0,7 cm from the back panel. Can be equipped with a transformer (maximum supported power of 30 / 75 / 150 W) which is switched on/off with a switch-controlled socket (doors in clear glass) or with a sensor. LED with heat graduation of 3000K-24V from 11 W/ml.
- vertical: positioned on a side panel or internal partition and angled at 30° at a distance of 8,2 cm from the front panels. Can be equipped with a transformer (maximum supported power of 30 / 75 / 150 W) which is switched on/off with a switch-controlled socket (doors in clear glass) or with a sensor. LED with heat graduation of 3000K-24V from 11 W/ml.
Mirror: 64,2 cm in height, in a natural mirror-glass finish. Only available for the 93,5 / 105,5 / 117,5 cm modules. To be positioned on the back panel of the column cupboard/ unit.
Drawer: 35,7 cm in depth and 13 cm in height, complete with a top (2,5 cm thick). Only available for the 93,5 / 105,5 / 117,5 cm modules.
Assembly Tips
Hardware pre-mounted on all elements to facilitate and speed up the assembly process. The hinged doors are equipped with n.4 slow-closing metal hinges and a rubber dust stop. The feet, which are also pre-mounted on the stands, allow for the correct levelling of the cupboard.
Further Information...
Honeycomb Panels: panel made with an internal honeycomb structure and a perimeter frame of 5 / 7 cm made from top-quality solid pine, closed with 2 panels in MDF (0,3 / 0,4 cm thick) which are subsequently lacquered and veneered.
The strengths of honeycomb panels are:
- greater durability over time;
- greater resistance to load;
- significantly reduced weight of the panels (up to 60% less), useful for transport, assembly, moving or removals, but especially to reduce the weight of the doors on the structure and hardware;
- hardware always fixed on the perimeter (in solid pine wood) of the sides and doors, so hinges will have a higher resistance and the furniture will have a considerably longer life;
- better resistance to humidity, as the material "breathes";
- product is exclusively "100% Made in Italy".
