Bed With Built-In Nightstands

Atlas bed with built in nightstands and upholstered panel headboard that can work as a partition element in an open space.

* Required Fields

From €1,112.74


Atlas is a bed with built in nightstands and upholstered panel headboard that can work as a partition element in an open space. Atlas in the XL version will furnish an entire wall or could be use to separate the night area in a loft or attic. Its design is of a strong impact and it is also practical as this modern young bed comes also with storage box with a depth of cm 209 or cm 199 for smaller bedrooms. Both the headboard and the bed frame cover are entirely removable and they are matched with modern sleigh feet and metal bedside tables that can be chosen plain or upholstered.
Its nightstands are a nice solution for those who are looking for a laying surface with a contemporary look. The models with storage box can be equipped with Clean Up System to clean easily under the bed using some levers.

XL headboard ideal for beds to be set in the middle of the room
storage box available for all models
bed frame and headboard with entirely removable covers
profiles with relief border in 2 models
manual lift up mechanism
practical and useful tool holdes matching the bed
models without storage box with optional set to modify the height of the slatted base

Model and Measurements
Models: single, large single and French double, standard and king size
Width and Depth: see the measurements available in the Menu
Headboard Height: cm 97

Materials and Finishes
- fabric, velvet, faux leather (entirely removable)

Information for your Quote
Mattress not included. You can find a suitable mattress inside the Mattress section: the mattress must be in the same measurements of the slatted base.

Technical study

Model and Measurements Specifications
Bed Frame:
- single: cm 118 h.34
- large single: cm 148 h.34
- French double: cm 168 h.34
- standard double: cm 188 h.34
- king size: cm 208 h.34

Bed frame Height:
- from the ground: cm 34
- Smart: cm 31 (+ 3 cm for the feet)
- York: cm 21 (+ 13 cm for the feet)

Headboard Thickness: cm 15

Technical Specifications and Equipment
Slatted Base: with slabs of mm 68 in beech plywood curved with hot vapour with a really low formaldehyde emission rates. The slabs are attached to a metallic structure with rubber attachments. The structure is in stainless steel with a square section mm 40 x 30. Painted with epoxy powders.
Structure: wooden fir slabs and/or boxed wood in poplar plywood. Panels of mm 18/25 in poplar wooden particles in class E1 with low formaldehyde emissions and natural wooden fibre.
Filling: crushproof expanded polyurethanes with a differential portance, density from 18 to 40 Kg/m³. First Cover in heat coupled expanded polyester with attaching interline in polyester and/or 100% polyester wadding of 200 gr.
Headboard: The bed is entirely refined, also on the back part. The back of the headboard is covered with the same fabric applied on the front, granting therefore also an eventual positioning in the middle of the room.
Storage Box: panels of mm 12-14 in poplar wooden particles in class E1.
Slatted base with simple lift up mechanism: traditional tested and certified up to 5.000 cycles, it allows the lift up at 45°. The structure in epoxy powders painted steel has gas springs set to the weight of the mattress.
Slatted Base with double lift up mechanism: tested up to 4.000 cycles with the same assisted mechanism, that allows the lift up to 45°; and the lift up of the slatted base and of the mattress parallel to the floor at the necessary height (m h.1). Useful to have easy access to the storage box and to make the bed with more comfort. Structure epoxy powders painted steel with gas springs set to the weight of the mattress.

Basic standard: n.4 feet in regenerated or recycled polypropylene, available in wengé black, white or silver. Height cm 3.
Sleigh feet: feet in oval tube in grey lead painted metal m h.13.
Lux: n.4 "L" shaped feet for overall measurements cm 18 x 18 h.3. Available in natural seasoned beech wood painted in wengé black, matt white or chrome.

Remove Slatted Base: possibility to buy the bed without the slatted base, option available only for models without storage box.
Set of corner supports: available for he models with non-mechanic slatted base without storage box. These supports enables you to adjust the height of the slatted base to obtain a mattress which could be more or less set deeply in the structure. The 3 heights of positioning are: cm 5, cm 6 e cm 12.
Clean Up System: manual lift up mechanism for the beds with storage box that allows to displace the the structure lifting 2 levers, set on the sides of the bed frame. In this way, 4 strong rubber wheels low down and the bed lifts up of cm h.13; it can be displaced  effortlessly back and forth. When levers are pulled down, the wheels go up becoming invisible and the bes rests again on its feet. Easy, fast, practical and safe.
Tool Holder: useful practical solution attached to the bed frame with a velcro. These you can store glasses, magazines the mobile phone and all your personal objects.
Nightstand: in curved metal painted in coal grey that can be pulled inside the bed frame and can be displaced. These elements can become comfortable seating surfaces with their upholstered covers. Measurements:cm 53 d.30 h.33.

Assembly Tips
Easy to be assembled, equipped with instructions for the assembly and maintenance.
The bed is delivered with mechanisms already set on sides, in case of the bed with storage box, and the headboard is upholstered. Equipped with Catas certification


Additional Information

Area of Production
Not exportable to the United Kingdom or EIRE
Assembling Instructions
Download the Assembly Instructions
Cubic Metres
da 0,7 a 1,2 m³
Other Products from the same Collection
View all the products of the collection (cod.fls)

Partner Factory

This product is manufactured by a company set in Friuli region (Northern east of Italy) specialised in the production of upholstered product for more than 20 years. Their catalogue gathers padded items for the sitting and bedroom such as linear sofas, corner sofas or sofas with chaise longue together with single or double beds in fabric, velvet or faux-leather. The wide variety of products and the several covers available make these products highly bespoke.

The production is entirely made in Italy by the hands of skilled artisans that work at the same time with an industrial perspective by using modern techniques and high quality materials: from microfibres to natural yarns like cotton, linen, stain-resistant fabrics, fireproof or flame-retardant. This company belongs to Livenza furniture district certified by Emas which guarantees eco-friendly manufacturing procedures.

Valuable sofas and upholstered beds

You may also like