Design Table

Haynes oval table with metal and wood 'X' legs with glass and ceramic top in different colours. Available in four sizes.

* Required Fields

From €2,559.69


The Haynes oval table with 'X' legs is characterised by a base consisting of two cross-beams. One is painted metal and the other in solid oak and secular wood; the combination of the different materials creates a material contrast with a strong visual impact. 
The top can be made of extra-clear or smoked glass or ceramic; it comes in 4 sizes and can seat 6 to 12 diners. The two smallest sizes have a 76 cm base and the largest a 143 cm base.
Haynes is a very versatile table, ideal in a dining room or living room with a rustic and contemporary style but also elegant and sophisticated depending on the combination of finishes chosen. 

Living room table with oval top and 'X' base
Bases in painted metal and wood essences such as Oak and Secular
Top in extra-clear and smoked glass or ceramic
4 measurements available, from 160 x 110 cm to 300 x 120 cm

Model and Measurements
Table Height:
- 75 cm

- Small 76 cm for table 160 x 110 and 200 x 110 cm
- Standard cm 143 for table 240 x 120 and 300 x 120 cm
Top thickness
- glass: 1,2 cm
- ceramic: 1,2 cm (0,6 ceramic combined with 0,6 glass)

Material and Finishes
- glass
- ceramic
- powder-coated or galvanised metal
- oak and solid wood

Technical study

Hammered glass is obtained by working the sheet in a melting furnace (this is why it is also called 'fired glass') The sheet that has already been moulded is in fact heated and then left to cool: The sheet that has already been moulded is in fact heated and then left to cool: as it cools, the glass 'relaxes', acquiring the particular texture: the effect you get as a result is a wavy surface reminiscent of wrought iron, rich and textured both to the eye and to the touch, which gives a pleasant play of light, shadows and reflections. 

Secular wood is the only wood where no trees are felled. Its processing requires decades of experience in cabinet making and restoration, as well as a considerable amount of man-hours. This is achieved through the careful selection of rare and precious reclaimed wood from the beams and structural planks of old buildings, which are restored and shaped with craftsmanship, leaving intact the natural veneer gained through exposure to the elements for more than 100 years. The main woods used are Elm (70%), Spruce (20%) and Oak (10%).  
Any colour, aethetic and tactile differences between one plank and another are to be considered not a defect, but an added value, precisely because they are due to the inherent variability of a completely natural wood.

Solid wood is wood from FSC-certified supplies (forests managed correctly and responsibly according to strict environmental, social and economic standards). Only the highest quality 7-layer solid spruce or birch panels with grade A veneer, with zero formaldehyde emissions, are used for the blockboard wood. 
All woods are finished with an all natural, food-grade, water-based, colourless clear top coat. Glues are limited as much as possible in favour of mechanical joints; if used, vinyl glues are zero formaldehyde, ammonia and APEO emission. 

Additional Information

Area of Production
Seat Number
The seats schemes show the maximum seat number: the actual number depends on the seat width. The Customer Care staff is at your disposal for further information.
Other Products from the same Collection
View all the products of the collection (cod.ntr)

Partner Factory

This article is the result of the continuous research of this Italian company, active in the recovery of 100% natural materials to be used in the furniture sector. Tables, bookcases, sideboards and cupboards are built with antique wood that preserves the original characteristics while enhancing the charm given to it by the passage of time. Widely used is also marble and hammered glass that harmoniously binds with wood and enhances its characteristics. Attention to the preservation of the environment also emerges from the soft colours that recall the tones of nature, perfect for both modern homes and in an environment with a classic and formal taste.
"Natural design" is the leitmotif of the entire collection, which, together with the extensive use of glass, lightly worked wood and marble, proposes high-level complements that become the protagonists of an exclusive environment, whether it is a dining area or a living room.
Each product is conceived, designed and built in Italy to be proposed to an international market attentive to the high quality of Made in Italy furniture. The experience and excellence of the work carried out by the brand is widely perceivable the moment one comes into contact with any item proposed in the catalogue.

You may also like