Technical Specifications and Features
The N82 Atlantic bathroom cabinet is composed of:
n.1 washbasin base unit with drawers: cm 95 d.50 h.50. Equipped with assisted closing.
n.1 base unit with drawers: cm 50 d.50 h.50. Equipped with assisted closure.
1 top: 146 d.51 cm, thickness 1 cm in stratified HPL.
n.1 washbasin: cm 54 d.1,3 h.34, all-over basin Lisbona model in Hpl Stratificato. The dimensions of the basin are: cm 50 d.32 h.12. Without overflow hole, with hole for mixer on top or wall.
n.1 wall-hung hinged wall unit: cm 35 d.20,8 h.150.
n.1 Wap mirror: cm 120 d.2,6 h.75.
Base, wall unit and open element structure: cm 1.8 thick, made of particle board panels.
Base and wall unit fronts: cm 1.8 thick, made of particle board panels. For base and wall unit handles, push-pull and groove.
Legrabox drawers: characterised by straight sides both internally and externally, only 1.28 cm thick. Equipped with a metal frame with full-extension runners and slow-closing mechanism.
Handles: you can choose from various models of handles, in addition to the push-pull opening.
Handles cod.152, cod.16 and throat with grip are available in matt lacquered finish in all sample colours.
Handles mod. 68- protrude 4 cm from the door surface.
Optional
organiser: internal subdivision system for the Legrabox drawer. Available in Orion Grey finish.
Maintenance Tips
Furniture: use neutral liquid detergents for cleaning. To remove limescale stains, wipe the surface with a sponge soaked in vinegar or anti-limescale product, then rinse and dry. Do not use acids, abrasive products or powders; do not leave anti-limescale products in contact with the surface for a prolonged period of time, as this could create halos.
Lacquer: use soft, non-abrasive cloths for cleaning to avoid damaging the surface. Do not use products containing solvents, acetone or abrasives, nor wax, alcohol or silicone-based products.
Wood: 'living' material protected superficially by varnish; for cleaning, use a soft, non-abrasive, damp, well-wrung cloth. It is recommended to clean the top in the direction of the grain and dry carefully.
Laminated HPL: for cleaning use a soft, damp cloth, without wringing so as not to scratch or abrade the top. The use of neutral detergents is recommended. Absolutely do not use abrasive or scratching substances (abrasive powders or detergents, scouring pads), detergents or descaling agents or drain cleaners containing acids or strongly acidic salts (based on hydrochloric, formic or aminosulphatic acid), metal cleaners.
Avoid pouring boiling liquids into the basin and use steam cleaners. After use, it is good practice to dry the wash basin to prevent limescale build-up. In the case of stubborn limescale, kitchen vinegar may be used on the affected area, leaving it to work for max. 5 min. and rinsing immediately afterwards. The use of concentrated limescale remover (e.g. Viakal) is highly inadvisable.
