Technical Specifications and Features
The N81 Atlantic bathroom cabinet is composed of:
n.1 shelf: cm 141 d.51 th.12,5 in HPL stratified melamine. Equipped with n.3 metal supports, not visible.
n.1 integrated basin: cm 48,5 d.29,5 h.10 in stratified HPL melamine. Without overflow hole, with mixer hole central to the tub.
n.1 chromed siphon: square section mod. Free cm 5 d.44,5 h.15/36 or round section mod. Millenium cm 6 d.44,5 h.14/36.
n.2 base units with drawer: cm 70 d.50 h.25.
n.1 top: cm 141 d.51 h.1,8 in the same colour of bases with drawer.
n.1 structure for base units with drawer: cm 140 d.50 h.24 in matt black aluminium.
n.1 wall unit with two doors: cm 70 d.20,8 h.50.
n.1 open element: cm 50 d.20,8 h.50.
n.1 Alfa mirror: cm 50 d.2,6 h.120. Matt black profile, without socket and switch.
n.1 Led spotlight mod. Ziko: cm 8 d.17,5 h.4,3. Matt black structure and satin methacrylate with LED (3.5 W, 230 V, IP44, 4000K, 338lm, class A). Integrated transformer.
Base, wall unit and open element structure: cm 1.8 thick made of particle board panels.
Base and wall unit fronts: 1.8 cm thick, made of wood particle-board panels. With a smooth lacquered or veneered finish, the front is made of 1.9 cm thick MDF.
Legrabox drawer: characterised by straight drawer sides both internally and externally, only 1.28 cm thick. Equipped with a metal frame with full-extension runners and slow-closing mechanism.
Handles: you can choose from various models of handles, in addition to the push-pull opening.
The handles cod.152-, cod.16- and both metal profiles are available in a matt lacquered finish in all sample colours.
The handles mod. 68- protrude 4 cm from the door surface.
Optional
organiser: internal subdivision system for the Legrabox drawer. Available in Orion Grey finish.
Maintenance Tips
Veneered: use neutral liquid detergents for cleaning. To remove limescale stains, wipe the surface with a sponge soaked in vinegar or anti-limescale product, then rinse and dry. Do not use acids, abrasive products or powders; do not leave anti-limescale products in contact with the surface for a prolonged period of time, as this could create halos.
Lacquer: use soft, non-abrasive cloths for cleaning to avoid damaging the surface. Do not use products containing solvents, acetone or abrasives, nor wax, alcohol or silicone-based products.
Wood: 'living' material protected superficially by varnish; for cleaning, use a soft, non-abrasive, damp, well-wrung cloth. It is recommended to clean the top in the direction of the grain and dry carefully.
Laminated HPL: for cleaning use a soft, damp cloth, without wringing so as not to scratch or abrade the top. The use of neutral detergents is recommended. Absolutely do not use abrasive or scratching substances (abrasive powders or detergents, scouring pads), detergents or descaling agents or drain cleaners containing acids or strongly acidic salts (based on hydrochloric, formic or aminosulphatic acid), metal cleaners.
Avoid pouring boiling liquids into the basin and use steam cleaners. After use, it is good practice to dry the wash basin to prevent limescale build-up. In the case of stubborn limescale, kitchen vinegar may be used on the affected area, leaving it to work for max. 5 min. and rinsing immediately afterwards. The use of concentrated limescale remover (e.g. Viakal) is highly inadvisable.
Read more...
Layered HPL: high thickness laminate (10 mm) consisting internally of layers of cellulose fibres impregnated with phenolic resins while the outer layers are impregnated with thermosetting resins. The whole undergoes polycondensation of the resins with high pressure (9Mpa) combined with heat of 150° during pressing. The surface itself is rough.
This material, thanks to its innumerable virtues, finds vast applications where a high level of hygiene is a fundamental characteristic: public and private environments, hospitals, restaurants, bars, kitchen environments, bathroom environments, wellness centres, changing rooms, swimming pools, hotels and schools.
A non-porous material that does not create mould and/or bacteria, scratch and impact resistant, abrasion and wear resistant, high resistance to chemical and organic agents, high impermeability, dustproof, easy to clean, non-toxic and suitable for food contact, environmentally friendly, flame retardant.
