Atlantic Bathroom Top D.38

Top for bathroom elements from the Atlantic collection, available in several finishes.

* Required Fields


From €21.57

Description

This top for bathroom elements belonging to the Atlantic collection is available in a wide range of finishes and thickness measurements, so can be adapted to every taste and need.
The countertop can be used on cabinets, columns and wall units. If there is a composition with more than one element, the top will come in one single piece.
We recommend the use of a top for columns and wall units which are visible from above, in order to add to the elegance of the item.

Characteristics
available in several finishes
mandatory on cabinets, optional on columns and wall units
optional splashback for stone tops

Materials and Finishes
- melamine
- matt and glossy lacquer
- wood veneer
- stone
- stratified HPL
- gres stone
- tekor

Information for your Purchase
The top protrudes by 1 cm on the front and 0,5 cm on the side compared to the base, column or wall unit. If you have a composition, the top will be in one single piece.

Technical study

Optional Elements
Splashback: an optional element for completing a bathroom cabinet with a stone top; particularly suitable for uneven walls and for supporting mirrors.

Maintenance Tips
Melamine: to clean, please use neutral liquid detergents. To remove limescale marks, use a sponge soaked in vinegar or an anti-limescale product, wash and then dry out. Do not use acid products or abrasive powders; do not leave the anti-limescale products on the surfaces for too long, in order to avoid staining.
Lacquer: clean with a soft, non-abrasive cloth to avoid scratching the surface. Do not use products containing solvents, acetone or abrasive agents. Avoid silicon, alcohol and wax based products.
Wood: a "living" material with superficial varnish protection; to be cleaned with a soft, non-abrasive, damp cloth. It is recommended to clean the top in the direction of the veining. Dry with care.
Stone: to avoid stains, clean quickly with a damp cloth or neutral cleaning products. Neutral Cleaning products are recommended.
To make the surface fully waterproof and stain-resistant, it must be covered with a water-based, water-repellent and stain-resistant acrylic paint.
Stratified HPL: for maintenance, the surface must be cleaned with a soft, damp cloth, without scrubbing so that the surface does not get damaged. Neutral products are recommended. Do not use abrasive or scratchy substances, acids or highly acidic salts, metal detergents and concentrated anti-limescale products. Avoid contact with boiling water and avoid the use of steam cleaners.
Tekor: to maintain Tekor, simply use soapy water or common, slightly abrasive detergents with a cotton cloth or a slightly abrasive sponge, making sure to dry the surfaces carefully. Avoid putting objects on the surface which are very hot or aggressively acidic, and avoid using a mix of solvents. Damage can, however, be repaired by a specialised craftsman.

For more information...
Gres: grès stoneware is the result of a water and clay mixture that, through the extrusion process, changes into a plate with extraordinary mechanic properties. The vitrification closes the orifices and guarantees the highest resistance to water and stains.
Tekor: a mineral compound coated with a film of resin to increase the physical and chemical resistance of the material.

Additional Information

Area of Production
Italy
Other Products from the same Collection
View all the products of the collection (cod.cmp)

Partner Factory

This bathroom furniture is a 100% Italian product made by a company from the province of Pordenone that started in the field during the 90s. Initially oriented towards the production of classic and modern bathrooms, it grew throughout the years earning national and international fame in the water and sanitary system as well. The company headquarters cover 16.500 square metres and are equipped with innovative machinery. Its business is characterised by the high quality standard of the materials employed, studied and renovated every year to follow the latest fashion. The solid wood comes from forests that follow regularised policies regarding tree cutting and all the other materials are either recycled or recyclable. Every productive phase takes place inside the company itself in order to guarantee the highest monitoring level.

The company creates its personal models but still focuses on the needs of modern housings in terms of space and taste. Moreover, the modular nature of the products allows for high customisable projects. It is possible to widen the initial composition with additional accessories and equipment in every moment. The wide collection and the colour range offered cover several different styles and types of environment: from a more elegant and refined bathroom to an original design, from soft and natural shades to pastel colours. Cabinets with drawers and baskets placed under the basin, wall-hung drawers, columns to store linen or beauty products, dressing tables of the most diverse shapes: the bathroom vanities of this collection are thought to satisfy every need.

Bathroom Furniture

You may also like